Hello
i have came across a profex 2 and would like to hook it up. im currently running two nashville 400 amps. my set up is LDG SD10, going to a good ritch sustain, then to a strobe tuner, then to a hilton delay, then to a hilton volume pedal, and out to the two amps. can someone guide me in right direction to get the profex 2 connected corectly. i would like use both amps with the profex. all help is greatly appreciated. thanks
Pro Fex 2 how to hook up to two amps
Moderator: Dave Mudgett
-
Stevan Sparks
- Posts: 12
- Joined: 7 Nov 2022 6:36 pm
- Location: Oregon, USA
- State/Province: Oregon
- Country: United States
-
David Martin
- Posts: 252
- Joined: 11 Sep 2000 12:01 am
- Location: Kingsport, TN 37660 USA
- State/Province: -
- Country: United States
I have a Profex 11 and earlier in my steel journey I used 2 NV400s. I used the Profex in a rack case with a rack mount tuner. The Profex has two outs and I ran a cord to each 400. Delay, Reverb are controlled by Profex as well as tone. Each channel out can have it's own settings. You could have one amp with effects and the other clean if you wanted to.
I used a Hilton Volume with one out to the Profex and one out to each amp. I did add in a RAT distortion pedal at times. Steel-RAT-Volume Pedal-Profex-Amps. Hope this helps
I used a Hilton Volume with one out to the Profex and one out to each amp. I did add in a RAT distortion pedal at times. Steel-RAT-Volume Pedal-Profex-Amps. Hope this helps
SHO-BUD SUPER PRO D10(8+10)
EMMONS LL-III D10(9+9)
Too many Amps
EMMONS LL-III D10(9+9)
Too many Amps