Overuse injuries among studio pros?
Moderators: Dave Mudgett, Brad Bechtel
-
Mark Hepler
- Posts: 129
- Joined: 24 Jun 2016 8:09 am
- Location: Virginia, USA
- State/Province: West Virginia
- Country: United States
Overuse injuries among studio pros?
Franklin, Bouton, Hinson, Beavers, to name a few, have had long careers playing fast as blazes hour upon hour.
So, my questions is: what measures, if any, do studio pros like them take to prevent overuse injuries? Do they just play and let the chips fall where they may?
Maybe they have some advice about musicians’ physical longevity . . . ?
So, my questions is: what measures, if any, do studio pros like them take to prevent overuse injuries? Do they just play and let the chips fall where they may?
Maybe they have some advice about musicians’ physical longevity . . . ?
-
Ian Rae
- Posts: 6180
- Joined: 10 Oct 2013 11:49 am
- Location: Redditch, England
- State/Province: -
- Country: United States
Some sportsmen and -women are more injury-prone than others. Whether it's just a question of physical robustness or whether the mental instinct for self-preservation comes into play I would be interested to know.
If a steel player has good posture, and joints and tendons that don't tend to get inflamed, then their fitness will be unlimited. It's probably genetic - most things seem to be.
If a steel player has good posture, and joints and tendons that don't tend to get inflamed, then their fitness will be unlimited. It's probably genetic - most things seem to be.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
-
Steve Hinson
- Posts: 3988
- Joined: 4 Aug 1998 11:00 pm
- Location: Hendersonville Tn USA
- State/Province: Tennessee
- Country: United States
Well,I don't know how much"blazing" I'm guilty of...
...but I did the majority of my studio work in my 30s,40s,and 50s,and I didn't have any problems with that sort of thing...
Now(in my 60s),if I do a session or two and happen to have a live gig at night,my right foot might bother me
a little right at the angle where it sits on my gas pedal...other than that-all good...
SH
...but I did the majority of my studio work in my 30s,40s,and 50s,and I didn't have any problems with that sort of thing...
Now(in my 60s),if I do a session or two and happen to have a live gig at night,my right foot might bother me
a little right at the angle where it sits on my gas pedal...other than that-all good...
SH
-
Mark Hepler
- Posts: 129
- Joined: 24 Jun 2016 8:09 am
- Location: Virginia, USA
- State/Province: West Virginia
- Country: United States
Thanks for the reply, Steve. All I know is that your tone on songs like Danni Leigh's "I Feel A Heartache" is as big as a house: it sounds like you dig in when you pick.
Interesting take, Ian. Some tennis pros never have issues--others like Nadal run into problems.
But our thumbs, fingers, ankles, knees get a serious workout: lots of RPMs even in an hour of practice at home.
Interesting take, Ian. Some tennis pros never have issues--others like Nadal run into problems.
But our thumbs, fingers, ankles, knees get a serious workout: lots of RPMs even in an hour of practice at home.
-
Earnest Bovine
- Posts: 8369
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA USA
- State/Province: -
- Country: United States
-
Ian Rae
- Posts: 6180
- Joined: 10 Oct 2013 11:49 am
- Location: Redditch, England
- State/Province: -
- Country: United States
-
Mark Hepler
- Posts: 129
- Joined: 24 Jun 2016 8:09 am
- Location: Virginia, USA
- State/Province: West Virginia
- Country: United States
Pickers like Lloyd Green still play the bejesus out of steel at fairly advanced ages.
I was putting in 3-4 hours a day at 70, practicing set lists, speed picking, and playing out lots of weekends.
A year and a half ago my thumbs started to hurt; I thought I could work through it but it just got worse. The doc said it was tendonitis: standard overuse.
So, I backed off to an hour a day, using “deliberate practice” techniques: my playing’s improved, I think. I warm up with stretches first. Also, switching to Ernie Ball’s medium weight chrome bar has made a difference. Every night, watching TV or whatever, I slather on extra strength Bengay (the house smells like old man and dog-ha), followed by ice packs. But I didn’t have to quit playing and my thumbs hardly ever hurt enough to notice.
So I just wondered how guys we respect have managed to stay in the game so long and maintain such high levels of craft (think Tom Brady in the sports world).
I was putting in 3-4 hours a day at 70, practicing set lists, speed picking, and playing out lots of weekends.
A year and a half ago my thumbs started to hurt; I thought I could work through it but it just got worse. The doc said it was tendonitis: standard overuse.
So, I backed off to an hour a day, using “deliberate practice” techniques: my playing’s improved, I think. I warm up with stretches first. Also, switching to Ernie Ball’s medium weight chrome bar has made a difference. Every night, watching TV or whatever, I slather on extra strength Bengay (the house smells like old man and dog-ha), followed by ice packs. But I didn’t have to quit playing and my thumbs hardly ever hurt enough to notice.
So I just wondered how guys we respect have managed to stay in the game so long and maintain such high levels of craft (think Tom Brady in the sports world).
-
Bill Terry
- Posts: 2810
- Joined: 29 Apr 1999 12:01 am
- Location: Bastrop, TX
- State/Province: Texas
- Country: United States
-
Mark Hepler
- Posts: 129
- Joined: 24 Jun 2016 8:09 am
- Location: Virginia, USA
- State/Province: West Virginia
- Country: United States
-
Ian Rae
- Posts: 6180
- Joined: 10 Oct 2013 11:49 am
- Location: Redditch, England
- State/Province: -
- Country: United States
-
Richard Sinkler
- Posts: 17843
- Joined: 15 Aug 1998 12:01 am
- Location: Missoula
- State/Province: Montana
- Country: United States
-
Mark Hepler
- Posts: 129
- Joined: 24 Jun 2016 8:09 am
- Location: Virginia, USA
- State/Province: West Virginia
- Country: United States
Dude, with beer like Moose Drool and Cold Smoke on tap, how to you Montana guys avoid wrist damage from hoisting those iced mugs?Richard Sinkler wrote:Does a fried brain count?
I was out there in the spring: between the beer and the buffalo steaks it was hard to keep it between the buoys.
Since I started the thread, I get to declare no limit on topic drift . . . until bOb cuts us off
-
Richard Sinkler
- Posts: 17843
- Joined: 15 Aug 1998 12:01 am
- Location: Missoula
- State/Province: Montana
- Country: United States
I have only been here since September and haven't even gone to any clubs, brewpubs or anything. So, I have yet to try those brews. I have tried a few canned/bottled Montana brews, and haven't been real impressed. But microbrews always taste better to me, out of a tap.
Carter D10 8p/7k, Dekley S10 3p/4k C6 setup, Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112, Ibanez Gio guitar, Epiphone SG Special (open G slide and regular G tuning guitar) .
Playing for 55 years and still counting.
Playing for 55 years and still counting.
-
Mark Hepler
- Posts: 129
- Joined: 24 Jun 2016 8:09 am
- Location: Virginia, USA
- State/Province: West Virginia
- Country: United States
-
Erv Niehaus
- Posts: 27180
- Joined: 10 Aug 2001 12:01 am
- Location: Litchfield, MN, USA
- State/Province: -
- Country: United States
-
Mark Hepler
- Posts: 129
- Joined: 24 Jun 2016 8:09 am
- Location: Virginia, USA
- State/Province: West Virginia
- Country: United States
-
Donny Hinson
- Posts: 21800
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
- State/Province: -
- Country: United States
-
Dick Wood
- Posts: 3073
- Joined: 2 May 2005 12:01 am
- Location: Springtown Texas, USA
- State/Province: Texas
- Country: United States
-
Mark Hepler
- Posts: 129
- Joined: 24 Jun 2016 8:09 am
- Location: Virginia, USA
- State/Province: West Virginia
- Country: United States
-
John Lacey
- Posts: 2389
- Joined: 6 Jan 1999 1:01 am
- Location: Black Diamond, Alberta, Canada
- State/Province: -
- Country: United States
-
Bob Hoffnar
- Posts: 9495
- Joined: 4 Aug 1998 11:00 pm
- Location: Austin, Tx
- State/Province: Texas
- Country: United States
I'm having problems with my hip flexor on my right hip that was starting to impact my lower spine and cause nerve damage in my legs and feet. I got an MRI and then went to physical therapy where I learned a series of exercises that have stopped the problem before any degeneration happened. I was lucky to catch it soon enough. I have a few full time steel playing friends that are currently unable to play or play with great difficulty because of what seems to be a similar problem that has manifested in there feet.
Stay or get in shape people ! This stuff is very painful and debilitating and it's right around the corner.
Stay or get in shape people ! This stuff is very painful and debilitating and it's right around the corner.
Bob
-
Richard Sinkler
- Posts: 17843
- Joined: 15 Aug 1998 12:01 am
- Location: Missoula
- State/Province: Montana
- Country: United States
Last year, I had surgery to alleviate trigger finger in my right middle finger. Surgeon said it was the worst he had ever seen. At the same time, he had to do a radial tunnel release, as my radial nerve was being crushed. I still have pain in my hand and arm, but the trigger finger is gone. I had to take a year or year and a half off, as I lost control of my middle finger, and the pain in the hand was fairly bad. My original right hand/arm injuries occurred from working on a car assembly line for 5 years. Already had carpal tunnel release surgery, tendon in elbow reattachment, and ulnar nerve transposition (moving funny bone nerve from back of elbow to the front of the arm), in my right arm, years ago. Playing is what triggered (pun intended) this last round of surgeries.John Lacey wrote:I got a trigger finger problem from lifting my gear. Didn’t affect my playing (middle on right hand) but has been bothersome. Won’t see a surgeon for 10 months.
Carter D10 8p/7k, Dekley S10 3p/4k C6 setup, Regal RD40 Dobro, Recording King Professional Dobro, NV400, NV112, Ibanez Gio guitar, Epiphone SG Special (open G slide and regular G tuning guitar) .
Playing for 55 years and still counting.
Playing for 55 years and still counting.
-
Paul Strojan
- Posts: 253
- Joined: 15 Aug 2019 10:19 pm
- Location: California, USA
- State/Province: California
- Country: United States
-
Jacek Jakubek
- Posts: 336
- Joined: 10 Mar 2007 7:53 am
- Location: Mississauga, Ontario, Canada
- State/Province: -
- Country: United States
This is a very important topic, especially for Pedal Steelers. Playing steel, you are forced to ALWAYS sit in the same position: Upright, hands, feet, knees, always in the same position. It can lead to injury if you're not sitting comfortably. With other instruments such as 6-string guitar, you can lean back in your chair to practice, then stand for a bit, sit on the floor, change your position when you get uncomfortable and still go on practicing. With pedal steel, you can't. I find this is THE single reason I haven't been able to practice as much as I wanted to and get as good as I wanted to.Paul Strojan wrote:I think having a guitar that can be played in a comfortable position is important as well.
Ever since I got my PSG, playing it for longer periods gave me upper shoulder/neck pain. At first I ignored it (No pain, no gain
It's important to NEVER ignore any pain that playing may give you and modify your guitar (if possible) and sitting position, or simply take more breaks when playing.
Now when I practice, I go for like 15mins to 30mins max before taking a little break to stand up, do some stretches, movements, and so on.
I'm also curious what some of the pro players mentioned in this discussion have to say about this topic, since they must have put a ton of practice time to get to the level they're at. My guess is that a lot of it has to do with good genetics (as Ian Rae mentioned.) Just being lucky to have inherited and maintained a properly working body.