After gettin a better understanding about split-tuning screws and that they are no more than a lowering stop on the changer finger it occured to me that there are some fancy changes to experiment other than normal split tuning.
1 would be a knee lever w pull rod that lowers 8 E-Eb and stops at Eb because of split tuning screw, then if one moves the knee lever further it will raise 4 E-F#.
2 would be to lower 4 E-Eb and stops at Eb because of split tuning screw then if one moves the knee lever further it raises 8 E-F
This would in effect give two useful changes on one knee-lever.
Another experiment I have mentioned in an earlier post for those that have 1&7 F#-G. Has anybody tried to raise 6 G#-A on the same lever. It will normally be covered in the A-B position but if one releases Bpedal there is a maj7 chord left on strings 6 5 4 3.
Bengt Erlandsen
Knee--lever experiments
Moderator: Dave Mudgett
-
Bengt Erlandsen
- Posts: 900
- Joined: 23 Feb 2001 1:01 am
- Location: Brekstad, NORWAY
- State/Province: -
- Country: United States