Lemay mod???

Guest · Post by **Guest** » 19 Apr 2003 9:15 am

I have a Nashville 400 with a lemay mod installed.I have never tried a Nashville 400
without a mod.Does it make a lot of difference? What does it do?

Larry Behm · Post by **Larry Behm** » 19 Apr 2003 9:47 am

Clean and clear in all ranges.

Larry

Donny Hinson · Post by **Donny Hinson** » 19 Apr 2003 10:41 am

It adds a lot of bottom, and kills that mid-range "nasal sound" that most solid state amps are famous for. Helps string separation, too (whatever that is). Well worth the money, IMHO.

Steven Black · Post by **Steven Black** » 27 Apr 2003 3:59 am

Can anyone tell me what amps or pre amps that
are rack mount can qualify for the lemay mod?

John Hawkins · Post by **John Hawkins** » 27 Apr 2003 7:53 am

Steven,

Peavey Profex II for one ! Maybe others I do not know . It made a great improvement in the Profex at the time I had one . I installed it myself by using the directions that were supplied . I would not attempt to install it in an amp like the 400, however . I am not that savy when it comes to that type installation .

Maybe you could get in touch with the inventor of this mod and get his take on the various applications it can handle . He may have a link on the forum .

John

Steven Black · Post by **Steven Black** » 27 Apr 2003 4:33 pm

Thanks John for your reply, I think I have to do it to my 9002 pre-amp but I do not know if it is included for the 9002 tube works pre-amp.

Gary Walker · Post by **Gary Walker** » 27 Apr 2003 9:48 pm

I added the LeMay mod to my Session 500 and it rounded out the tone and took the bark that these amps are noted for. It sounds great but still weighs a lot.

Steven Black · Post by **Steven Black** » 28 Apr 2003 3:09 am

wish I could do the lemay mod too my randall
RG 300.

Erv Niehaus · Post by **Erv Niehaus** » 28 Apr 2003 5:56 am

Steven,
I think you'll need to send your 9002 to Tube Works. But I don't know if it would be worth the expense. I understand they get around $100 of the mod.

b0b · Post by **b0b** » 28 Apr 2003 9:44 am

Moved to 'Electronics'