How clean is your guitar?

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Dave Mudgett

Danny Bentley
Posts: 304
Joined: 14 Sep 1998 12:01 am
Location: Hendersonville Tn
State/Province: -
Country: United States

How clean is your guitar?

Post by Danny Bentley »

My guitars are pretty clean. I've seen A few that were soo dirty I would have been embarassed to let anyone see them. How clean is yours??
Dan Bentley
User avatar
Leslie Ehrlich
Posts: 1295
Joined: 21 Nov 2002 1:01 am
Location: Saskatoon, Saskatchewan, Canada
State/Province: -
Country: United States

Post by Leslie Ehrlich »

I prefer to keep my guitars in their cases when I'm not playing them. However, my steel is a real pain to set up and take down, so I just leave it set up and it's ready to go whenever I get the urge to play it. I've seen covers for steels, but I'm too cheap to buy one. I just throw a sheet of clear plastic over my guitar and it keeps the dust off. Besides, it's such a sharp looking guitar I don't want to hide it.
User avatar
Johan Jansen
Posts: 3334
Joined: 4 Aug 1998 11:00 pm
Location: Europe
State/Province: -
Country: United States

Post by Johan Jansen »

I'm embarassed all the time, so dirty they are...
Each half year I clean them well, except the changers, that I keep in very good condition, all the time. ImageTo me it's just a working horse, but a good one!
And: My Volvo doesn't drive worser when it's a bit muddy Image
JJ

------------------
Image Click on the pic!

Smiley Roberts
Posts: 4564
Joined: 3 Dec 1999 1:01 am
Location: Hendersonville,Tn. 37075
State/Province: -
Country: United States

Post by Smiley Roberts »

Y'mean yer s'posed to clean 'em??? Image Image

------------------
<font face="monospace" size="3"><pre> ~ ~
©¿© It don't mean a thang,
mm if it ain't got that twang.
www.ntsga.com</pre></font>
User avatar
Gary Lee Gimble
Posts: 2009
Joined: 19 Jul 1999 12:01 am
Location: Fredericksburg, VA.
State/Province: -
Country: United States

Post by Gary Lee Gimble »

"so dirty they are..."

NOT!

Is simply vintage.

Gary Lee






User avatar
Doug Beaumier
Posts: 16061
Joined: 4 Aug 1998 11:00 pm
Location: Northampton, MA
State/Province: Massachusetts
Country: United States

Post by Doug Beaumier »

Mine is always dusty, dull, and worn out from thousands of gigs, and I love it that way! Danny, you have to learn to wear that filth like a badge of honor Image

I do a little polishing every time I change the strings, but in general I'm not concerned about keeping the instrument clean. Like Johan says, it's a workhorse. I have a shiny Emmons P/P that sits in the closet while I take my old beat up D-10 out on gigs. It's been my main steel for 24 years and it's like an old friend to me.

Recently I saw a steel guitar that was all grime and soot from cigarette smoke... it looked like the guy had used it as an ashtray. It breaks my heart to see a guitar that filthy.

------------------
<font size=-1>My Site - Instruction | Doug's Free Tab | Steels and Accessories</font>


<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Doug Beaumier on 04 December 2002 at 04:23 AM.]</p></FONT>
Jim Vogan
Posts: 486
Joined: 13 Jul 2000 12:01 am
Location: Ohio City, Ohio 45874
State/Province: Ohio
Country: United States

Post by Jim Vogan »

I think somebody posted on the Forum that Mooney took his steel to the car wash one day. Somebody barfed on it or some thing like that.

------------------
Jim Vogan Emmons Sd10
G.D. Walker Stereo Steel Combo
Bakelite Ric
Hilton volume pedal


User avatar
Tim Harr
Posts: 2569
Joined: 4 Aug 1998 11:00 pm
Location: Dunlap, Illinois
State/Province: Illinois
Country: United States

Post by Tim Harr »

I generally keep mine clean, free from smudges and dust best I can...


I give the whole thing a "once over" when I change strings (every month or so)

Sounds like a lot of cleaning but then again I am career military...I am kinda anal about keeping things clean and neat...

:-)



------------------
Tim Harr - Carter D-10 8 & 9 - Troy Cook & the Long Haul Band

John Borchard
Posts: 325
Joined: 24 Sep 1999 12:01 am
Location: Athens, OH 45701
State/Province: -
Country: United States

Post by John Borchard »

I used to throw my D-10 in the washing machine but after it shrunk down to a S-6, I decided I should probably at least not put it in the dryer Image.

Seriously, though, I clean my steel (dust and polish) each time I change strings. If I have it set up at the house, I keep it covered and I have a nice camel hair brush that I use to keep it (relatively) dust-free. I try to do a more thorough cleaning and lubing every 6 months but it's probably closer to once a year.

John Borchard
User avatar
Kenny Dail
Posts: 2638
Joined: 4 Aug 1998 11:00 pm
Location: Kinston, N.C. R.I.P.
State/Province: -
Country: United States

Post by Kenny Dail »

I cleaned mine one time and lost my "sound". Never been the same since. Image

------------------
kd...and the beat goes on...

User avatar
Tony Orth
Posts: 497
Joined: 5 Dec 2000 1:01 am
Location: Evansville, Indiana, USA
State/Province: Indiana
Country: United States

Post by Tony Orth »

The tag on my Emmons says "Dry Clean Only"

T
User avatar
Ken Williams
Posts: 771
Joined: 4 Aug 1998 11:00 pm
Location: Arkansas
State/Province: Kansas
Country: United States

Post by Ken Williams »

Well it depends on which guitar. The steel that I play most all gigs with is pretty clean. The 74 Emmons that I play at home is kinda nasty. I played that old Emmons in a nearby club for many years. Other band members would ask "Don't you ever clean or dust that thing?". My reply was always "No, I'm afraid it would ruin my tone." Image

Ken
User avatar
Al Marcus
Posts: 9440
Joined: 12 May 1999 12:01 am
Location: Cedar Springs,MI USA (deceased)
State/Province: -
Country: United States

Post by Al Marcus »

It is easy for me to keep mine clean and polished as I don't gig anymore.

So I always keep mine sharp. I have a vinyl cover I bought on the Forum, and I use it when not playing.

I can sure understand that you guys that gig a lot, would have a hard time keeping your guitar clean. I know, as I been there.....al Image
Dave Robbins
Posts: 803
Joined: 5 Feb 2000 1:01 am
Location: Cottontown, Tnn. USA (deceased)
State/Province: -
Country: United States

Post by Dave Robbins »

My LeGrande III, that I use for the studio, Grande Ol' Opry, and everything else, is my "workhorse". I consider it a "tool" and is usually being used or in the case ready to go out the door. I don't have the opportunity to clean it up, let alone time to change strings! It gets pretty dusty, but at the same time I try to respect the aluminum parts and not get them smudged up by not handling the guitar from the endplates, etc. (I lift it from the sides, not the endplates!)

However, my '64 push/pull is clean enough to eat on! But, I generally keep it out of "harms way" and only play it on certain occasions.

Someone once told me that all that dust, etc, adds character!!! LOL! Image
I sure do hate it though when someone writes their name in the dust on my LeGrande's fret boards! Image ...hmmm...that reminds me...I still have those spilled coffee stains on the pedal bar! Image

Dave Image


Ralph H. Moorehead
Posts: 55
Joined: 13 Apr 2000 12:01 am
Location: Las Vegas, Nv. Clark
State/Province: -
Country: United States

Post by Ralph H. Moorehead »

I got my Sho-Bud pro 2 from Don Woodbury Years ago. It has so many battle scars that I keep it clean out of respect for old warriors
Kevin Hatton
Posts: 8233
Joined: 3 Jan 2002 1:01 am
Location: Buffalo, N.Y.
State/Province: -
Country: United States

Post by Kevin Hatton »

You could eat off mine. They are restored vintage and I play them out every weekend. I treat them like family.
Donny Hinson
Posts: 21823
Joined: 16 Feb 1999 1:01 am
Location: Glen Burnie, Md. U.S.A.
State/Province: -
Country: United States

Post by Donny Hinson »

Welllll....my old one's pretty dirty underneath, but decent on the top side.

My excuse?

If it ain't "broke"...don't fix it. Image
Ron Shepard
Posts: 148
Joined: 14 Dec 1999 1:01 am
Location: Easthampton, MA, USA
State/Province: -
Country: United States

Post by Ron Shepard »

Doug B. But I just couldn't see the frets
on your ol push pull. I just had to clean er off Image
Matt Steindl
Posts: 431
Joined: 2 Jan 2002 1:01 am
Location: New Orleans, LA, USA
State/Province: -
Country: United States

Post by Matt Steindl »

Let me put it this way, I have a St. Bernard that thinks my studio is "his room", and I keep my PSG constantly out and uncovered in case inspiration strikes. Do you think it is clean and slobber free?

------------------
Mattman in "The Big Sleazy"-:
S-10 Dekley, Suitcase Fender Rhodes, B-bender Les Paul

User avatar
Doug Beaumier
Posts: 16061
Joined: 4 Aug 1998 11:00 pm
Location: Northampton, MA
State/Province: Massachusetts
Country: United States

Post by Doug Beaumier »

Ron, yes, I noticed you wiped the dust off my fretboard when you played my steel at the Rhode Island show. Funny, I never noticed any dust on it! Image

------------------
<font size=-1>My Site - Instruction | Doug's Free Tab | Steels and Accessories</font>


<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Doug Beaumier on 05 December 2002 at 09:35 PM.]</p></FONT>
User avatar
Buck Grantham R.I.P.
Posts: 3155
Joined: 30 Sep 1999 12:01 am
Location: Denham Springs, LA. USA
State/Province: -
Country: United States

Post by Buck Grantham R.I.P. »

I keep mine clean and oiled just like my pistol. Never know when I might get to pick on it somewhere.appearence is not everything but it helps.
User avatar
Johan Jansen
Posts: 3334
Joined: 4 Aug 1998 11:00 pm
Location: Europe
State/Province: -
Country: United States

Post by Johan Jansen »

I never wear white pants, they are greasy on the knees after a gig Image

------------------
Image Click on the pic!

User avatar
Joey Ace
Posts: 9791
Joined: 11 Feb 2001 1:01 am
Location: Hamilton, Ontario, Canada
State/Province: -
Country: United States

Post by Joey Ace »

I'm with Buck. I keep it clean.
I have a cover that goes on it between sets, or at home when not in use.

I keep a 1" paint brush in my practice area to brush away dust.

Frank Parish
Posts: 3077
Joined: 15 Sep 1999 12:01 am
Location: Nashville,Tn. USA
State/Province: -
Country: United States

Post by Frank Parish »

When I played downtown at The Turf the old 72 P/P was completely brown underneath from the smoke. It stayed there 24 hours a day and even though I had a floor length cover made for it, it still was dirty all over but mostly underneath. The cover kept the spilled drinks off but that's all. I'm playing a Sho-Bud on the gig right now and it's clean as can be underneath and on top. Hey Kevin, remember the P/P over at Duanes? It's the dirtiest guitar I have but only underneath. The 66 P/P has been in the case for the last 6 months and you can see yourself in the knee levers, super clean and polished.
Kevin Hatton
Posts: 8233
Joined: 3 Jan 2002 1:01 am
Location: Buffalo, N.Y.
State/Province: -
Country: United States

Post by Kevin Hatton »

Frank, that was one of the most beautiful push pulls that I ever saw.